How to Use Your Haakaa Baby Nasal Aspirator

Assembly:
1. Fit the silicone filter over the vacuum nozzle and make sure it’s well tightened.
2. Fit the collection container over the silicone filter of the aspirator and twist into the CLOSE position.
3. Choose appropriate silicone tip for your baby, then press to insert. Ensure it fits securely into the collection container.

Usage:
1. For dry or sticky mucus, spray saline solution to soften the mucus first.
2. To activate aspirator, press and hold the power button for three seconds. Quickly press the power button again to cycle through strength levels. Choose appropriate suction level, testing the strength on the back of your hand.
3. After selecting the appropriate suction strength, insert the silicone tip into your child’s nostril, ensuring there are no gaps. This makes the suction more effective.
4. When finished, gently remove the aspirator from your child’s nose. Hold down the power button until the light turns off.
5. Remove the collection container by carefully twisting it to the OPEN position and emptying it.

Please Note: Pay close attention to the collection container during use. If it begins to overflow, turn off the power and empty the collection container before continuing use.

Charging:
Charge for a full cycle before first use. When power is low, the indicator light will flash to let you know it needs charging. To charge, insert the USB plug into the trimmer’s charging port.

Connect the other end of the USB to a charging adapter, computer or external battery.

Low and Medium indicator lights will flash during charging. Once fully charged, all three lights will remain on. Charging the device takes approximately 2.5 hours.

PLEASE NOTE: We recommend you only use the charging cable that comes with the product. Other charging cables may affect normal usage. If the aspirator isn’t used regularly, make sure to charge it at least once a month to maintain battery capacity. Do not use this product while charging. If the USB cable is damaged, discontinue use.

Cleaning & Care
Disassemble before cleaning. Clean with water after each use, but DO NOT use water to clean the aspirator body, which contains the battery. Simply wipe down the aspirator body with a clean, dry cloth. The silicone tips can be sterilised with any steam sterilising system or by boiling in water for 2-3 minutes. Do not use bleach-based agents to clean this product.

Collection container is not suitable for sterilisers or boiling water – hand-wash in warm water and mild detergent only.

Caution
– Check product condition regularly. Discontinue use at first signs of damage.
– This product contains small parts that may become a choking hazard. Keep out of the reach of children and pets.
– Adult supervision required.
– Do not use this product for anything other than its intended use.
– This product is not waterproof. Never submerge or place under running water. Never use while charging.
– Never allow USB cable to dangle over edges where children can reach and pull on it.
– Always switch aspirator on and test strength before placing in your child’s nose.
– Turn this product off when not in use. Do not leave unattended while switched on.
– Product will automatically shut off after 15 minutes use.
– Do not use the aspirator with excessive force.
– If operating after a long period of disuse, charge for a full cycle first.
– Keep all parts stored in the dedicated storage case to avoid accidental damage.
– Do not drop, forcefully throw, or shake the appliance at any time, as this may cause breakages or malfunctions.
– If any discomfort is felt during use, please check that all parts are attached correctly. If discomfort persists, discontinue use.
– Do not use this product on injured or bleeding noses.
– This product contains a lithium battery. Please dispose of it at a certified battery recycling drop off point.